Achieve a beautifully restored and protected look for your palm trunks with Endurant Shine N Shield

Follow these steps for the best results:

Step 1: Initial Sealing Application

For the first application, mix Endurant Palm Colorant with Shine N Shield to both color and seal the palm trunk. This base coat ensures protection and prepares the surface for additional shine if desired. Allow the application to fully dry before applying any additional coats.

Step 2: Enhancing Shine (Optional Additional Coats)

Once the initial application has dried, apply Endurant Shine N Shield in the desired ratio to achieve your preferred level of shine:

• Minimal Shine: Mix 2 parts water with 1 part Shine N Shield and apply evenly.
• Medium Shine: Mix 1 part water with 1 part Shine N Shield for a balanced glossy finish.
• High Shine: Use Shine N Shield as a ready-to-use product (no dilution) for a maximum shine effect.

Application Process

1. Preparation:
   • Clean the palm trunk thoroughly, removing dirt, dust, and debris.
   • Ensure the surface is completely dry before application.
2. Application:
   • Use a pump sprayer or HVLP sprayer for even coverage.
   • For precision, apply using a soft brush or sponge.
3. Drying & Curing:
   • Allow each coat to dry for 30–60 minutes before assessing shine.
   • If adding another coat for increased shine, ensure the previous coat is fully dry before applying.
   • Full curing time: Up to 24 hours for maximum durability.

Best Practices

• Apply in dry conditions and avoid rain within 24 hours of application.
• Store unused product in a cool, dry place and use within 6–9 months for optimal results.