4 Gal. Deluxe Battery-Operated sprayer

Specifications:

- External lever to turn agitation on/off;
- Internal hydraulic agitator;
- Recommended with wettable powder or chemicals that easily settle out of solution.

Use:

- Turn on the hydraulic agitator before you start spraying;
- Turn off the hydraulic agitator before starting spraying to ensure higher pressure at the end of the nozzle;
*This ensures higher pressure at the end of the nozzle.

Agitator On

Agitator Off

Specifications:

- Type: Lithium Ion, rechargeable; - Rated voltage: 14.4 V d.c.;
- Capacity: 60 Wh (4200 mAh);
- Autonomy: 30 psi = 8 hours
60 psi = 4 hours - Recharge time: 4 hours
- Jacto’s battery Charger:110V/220V

Use:

- To Install: Identify the correct battery position and press it (gently) until a “click” is heard.
- Remove: press both locking buttons and pull the battery out of the battery housing.

Battery Housing

Charger

Specifications:

The Walking Pace function is a useful timer with audible beep to keep a uniform walking speed while spraying.

Use:

Press the red button to calibrate:
One time: 0.62 mph speed;
Two times: 1.24 mph speed;
Three times: 1.86 mph speed;
Four times: 2.49 mph speed;
Five times: turns off the step counter
Pace Indicator with 4 settings

Specifications:

5 pressure levels, where the leftmost light indicates the lowest pressure and rightmost light indicates the highest pressure.

Use:

- Press the green button to start the sprayer with low pressure;
- Press it again to select the desired pressure level (1 to 5);
- Pressure Lock: press and hold the green button for 10 seconds. The pressure level indicator will blink;
- Pressure Unlock: press the green button three times and the red button once (less than 3 seconds). The pressure level indicator will stop blinking.

Specifications:

Battery level indicator with three lights.

Use:

Battery level indicator:

*Five short beeps repeated every 30 seconds and all battery level indicator lights are off = Low battery (only a few minutes left to spray), recharge as soon as possible or change the battery.

Specifications:

- Press the green button once to start the eletronic interface;
- Press the green and the red button together and hold them for 10 seconds- The corresponding light of the level indicator will flash.

Hours of work according to the work indicator on the panel (flashing).